My R/C Center | 3D resin Printing | Activity https://www.myrccenter.com/groups/3d-resin-printing/ Activity feed for the group, 3D resin Printing. Sun, 05 Apr 2026 19:23:36 +0000 https://buddypress.org/?v=2.8.61 en-US 30 hourly 2 5555e2dd2094c8e104bc958ad5ca24ae Nelson joined the group 3D resin Printing https://www.myrccenter.com/activity/p/17619/ Wed, 08 Feb 2023 12:48:50 +0000 0 3a89653426adad27adea9612a72f96c8 Charles Hopkins joined the group 3D resin Printing https://www.myrccenter.com/activity/p/16838/ Mon, 28 Feb 2022 13:06:59 +0000 0 e8df8f85f9f87f8b14617eb9d8222919 James posted an update in the group 3D resin Printing: I had to replace the FEP on 3 resin tanks. Here is […] https://www.myrccenter.com/activity/p/16436/ Sun, 23 Jan 2022 18:24:55 +0000 I had to replace the FEP on 3 resin tanks. Here is Motoko Kusanagi from Ghost in the shell.
]]> 0 744bd61a18e716232f809bc13ba8542f James posted an update in the group 3D resin Printing: https://www.myrccenter.com/activity/p/16258/ Thu, 30 Dec 2021 00:33:17 +0000







]]> 2 170f4d828e5db2d504acddbedda0b1d3 James posted an update in the group 3D resin Printing: Pretty amazing how the prints go from a blob to what […] https://www.myrccenter.com/activity/p/16257/ Thu, 30 Dec 2021 00:32:58 +0000 Pretty amazing how the prints go from a blob to what you want after you replace the LCD screem

]]> 0 c6f11120fe1385fe2d90f60dc13733ac Rob joined the group 3D resin Printing https://www.myrccenter.com/activity/p/15530/ Wed, 20 Oct 2021 12:23:53 +0000 0 8d80ecc15bac591c7e3fbb0cd483bae6 James posted an update in the group 3D resin Printing: I had to replace the LCD screen on my Elegoo Mar pro. If […] https://www.myrccenter.com/activity/p/15508/ Wed, 20 Oct 2021 00:56:57 +0000 I had to replace the LCD screen on my Elegoo Mar pro. If you are doing a lot of printing then you put a lot of hours on the LCD screen. 
]]> 0 afdd9ed6058de4c8f060f67465bb8277 James posted an update in the group 3D resin Printing: I have my Resin printer running in the shop. I have […] https://www.myrccenter.com/activity/p/15465/ Thu, 14 Oct 2021 00:49:27 +0000 I have my Resin printer running in the shop. I have a problem where it gets hot so I used some scrap wood to get it an inch higher off the bench and put a fan on it. The air intake comes in from the bottom of the printer so the fan help.s. I think that the carbon-filtered air purifier works really well. there was very little smell when I went…

Read more

]]> 0 4d5cc268f218e2744e44157bf22f5ac2 nauti-tucu joined the group 3D resin Printing https://www.myrccenter.com/activity/p/15452/ Tue, 12 Oct 2021 15:33:21 +0000 0 51d347d0c1671e465fa97d7a0040e511 James posted an update in the group 3D resin Printing: I now have a place for my resin printer in my shop. I […] https://www.myrccenter.com/activity/p/15425/ Sun, 10 Oct 2021 03:19:48 +0000 I now have a place for my resin printer in my shop. I was going to build a ventilation system but I am going to wait on it for a while. I purchased a carbon-filtered fan to help with the fumes. I will see how well it works and if it does not help it looks like I will need to build the ventilation system.
]]> 0 cfca602a96b07416ab7b45253390b07c James posted an update in the group 3D resin Printing: Can someone please explain to me WHY? If I order […] https://www.myrccenter.com/activity/p/15154/ Tue, 24 Aug 2021 01:46:02 +0000 Can someone please explain to me WHY? If I order anything that has to come out of china it takes 8 to 12 weeks to get to my house. And when I order a roll of PolyAir 3D printer airplane filament from 3DLabPrint it only takes 3 days to get to my house from the Czech Republic.
]]> 5 6038542639cc3013fd8aae4964bae1db James posted an update in the group 3D resin Printing: It looks like the Elegoo Saturn price is starting to […] https://www.myrccenter.com/activity/p/15134/ Sun, 22 Aug 2021 22:48:15 +0000 It looks like the Elegoo Saturn price is starting to come down. I should be able to get one at Xmas

ELEGOO Saturn MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 4K Monochrome LCD, Matrix UV LED Light Source, Off-Line, and WLAN Print,192x120x200mm / 7.55×4.72×7.87 inches Printing Size

]]> 2 f2ca4dda2b2595a2403f701b0d71f8f4 David R posted an update in the group 3D resin Printing: Siraya has a sale going on Buy 1kg bottle of resin and get […] https://www.myrccenter.com/activity/p/15130/ Sun, 22 Aug 2021 03:30:21 +0000 Siraya has a sale going on Buy 1kg bottle of resin and get a free 1kg bottle of Fast ABS like white resin. Free shipping.

https://siraya.tech/collections/sales?fbclid=IwAR3RNeSOr6vtgqlgu8OerFf6Yo1aSkYVu4r7_S8nnTbvV-Tc8TZVHnWcqzU

Add the Fast (1kg) ABS-Like (White) first then the added another resin you want. The promo code is FASTWHITE202108

]]> 3 ea8b34b6f718ec07cd9a43d719490c5e David R posted an update in the group 3D resin Printing: I am slowly making parts for my German 1/45 Type IX […] https://www.myrccenter.com/activity/p/14933/ Tue, 06 Jul 2021 21:43:04 +0000 I am slowly making parts for my German 1/45 Type IX U848 Uboat. I had made a 3.7cm AA gun before, now the 2cm dual barrel AA gun and some deck Ammo containers are done. Oh some other parts too. Each part had ton of mistakes that I made that I had to fix over and over again damit. I also had to redesign them when parts were to thin. The…

Read more

]]> 1 0c558821f3834b41249e05f89e17e930 James posted an update in the group 3D resin Printing: Here is a nondestructive exhaust https://www.myrccenter.com/activity/p/14888/ Sat, 26 Jun 2021 02:10:23 +0000 Here is a nondestructive exhaust

Elegoo Mars Non-Destructive Exhaust Only by Zebraeel – Thingiverse
https://www.thingiverse.com/thing:3880688
I liked the Elegoo Mars Non-Destructive Ventilation and Heating Solution by guardian_de https://www.thingiverse.com/thing:3833875 I only needed to exhaust the printer out a…

Read more

]]> 0 395729b12a73674d62eb7b61cdfdf43f James posted an update in the group 3D resin Printing: The problem with the resin printers is the smell. I […] https://www.myrccenter.com/activity/p/14887/ Sat, 26 Jun 2021 01:24:54 +0000 The problem with the resin printers is the smell. I found this neat exhaust for the Elegoo mars resin printer on Thingiverse. It looks like you will have to do a little cutting on your machine to ii get it to work

Elegoo Mars Pro / 2 Pro Fume Exhaust Mod by gamla3d…

Read more

]]> 0 412e363787df8eea703832bebb0d77f4 James posted an update in the group 3D resin Printing: It's always something. I decided to upgrade my firmware […] https://www.myrccenter.com/activity/p/14801/ Fri, 04 Jun 2021 01:27:06 +0000 It\’s always something. I decided to upgrade my firmware on the Elegoo pro. I kept getting a resolution error for the LCD screen 1440. After a lot of research, it turns out I used the firmware upgrade for the Elegoo Pro 2 instead of the Elegoo Pro. Now that\’s fixed.

]]> 1 caa3dfd39adab71f5f49af5cbf614223 James posted an update in the group 3D resin Printing: I just changed out my LCD and fan. The LCD is still hot. […] https://www.myrccenter.com/activity/p/14787/ Sun, 30 May 2021 03:15:04 +0000 I just changed out my LCD and fan. The LCD is still hot. I believe I may have installed the fan in the wrong direction.

]]> 1 67eacf7191fd10e111c63beea9104a73 James posted an update in the group 3D resin Printing: If you are using Elegoo resins here is the setting and […] https://www.myrccenter.com/activity/p/14776/ Wed, 26 May 2021 01:40:29 +0000 If you are using Elegoo resins here is the setting and spec sheet for the Elegoo printers including the Saturn

]]> 0 44c6aa3ee746e09aa5f8d934da47632c James posted an update in the group 3D resin Printing: These are Community settings for resin printing https://www.myrccenter.com/activity/p/14774/ Wed, 26 May 2021 01:32:12 +0000 These are Community settings for resin printing

]]> 0 e6428c8913f37e4f95db6df8c95be5b7 James posted an update in the group 3D resin Printing: I replaced the cooling fan but I still have an […] https://www.myrccenter.com/activity/p/14772/ Wed, 26 May 2021 01:17:52 +0000 I replaced the cooling fan but I still have an overheating issue. I noticed that my light off delay was zero so I changed to 10 seconds. this should give it time to cool off.

]]> 0 67f2187496c9b93c450de59d1a3f10cf James posted an update in the group 3D resin Printing: Now the darn UV cooling fan has gone out on my Elegoo Mars pro https://www.myrccenter.com/activity/p/14749/ Sun, 16 May 2021 03:19:14 +0000 Now the darn UV cooling fan has gone out on my Elegoo Mars pro

]]> 3 b89996aacb871303eaf5c24db842e4c1 James posted an update in the group 3D resin Printing: Uncle Jessy has just done a review on the Elegoo Plant […] https://www.myrccenter.com/activity/p/14741/ Sun, 09 May 2021 23:28:10 +0000 Uncle Jessy has just done a review on the Elegoo Plant…

Read more

]]> 0 fa59092d9632352a5603d416b322a759 James posted an update in the group 3D resin Printing: I bought a Steam Punk girl model from CGTrader for 5 […] https://www.myrccenter.com/activity/p/14719/ Fri, 07 May 2021 01:05:52 +0000 I bought a Steam Punk girl model from CGTrader for 5 bucks. The detail is great. As soon as I replace the LCD on the printer I will print the rest of her.
]]> 1 b72ad346f987bee915f4e2582a4934b9 James posted an update in the group 3D resin Printing: Here is the best tip I can give on the Elegoo Mars Pro. […] https://www.myrccenter.com/activity/p/14718/ Fri, 07 May 2021 01:03:29 +0000 Here is the best tip I can give on the Elegoo Mars Pro. When not in use turn it off. I just replaced the LCD screen about 2 weeks ago and now I have to replace it again. I believe the problem is the heat generated by the light. I had it on for several days before I turned it off.

]]> 0 2cd527682ff7f0b8d85d106d8f3f7c82 Walt joined the group 3D resin Printing https://www.myrccenter.com/activity/p/14670/ Fri, 23 Apr 2021 19:46:41 +0000 0 65a2cb447afaf69dd6e858376c8c3b88 David R posted an update in the group 3D resin Printing: This is a 3rd updated version of my flak gun. I have […] https://www.myrccenter.com/activity/p/14523/ Fri, 26 Mar 2021 21:17:53 +0000 This is a 3rd updated version of my flak gun. I have not done any sanding on it at all yet.
]]> 10 342fa021931daee873eb430981b2edad David R posted an update in the group 3D resin Printing: Ok dam refining this gun is a lot of work. But its […] https://www.myrccenter.com/activity/p/14490/ Wed, 24 Mar 2021 23:16:14 +0000 Ok dam refining this gun is a lot of work. But its getting better. This is the second version. You can now see see the gun wheels and chairs. I broke the end of the barrel off by mistake taking off the support. Over all this version looks great. There will be a 3rd version soon to fix the… Read more

]]> 5 ba7c4eb46963e4ba80f62ed91faa17d9 James posted an update in the group 3D resin Printing: The white shell is HatchBox PLA and the Grey shell is […] https://www.myrccenter.com/activity/p/14448/ Tue, 23 Mar 2021 00:24:05 +0000 The white shell is HatchBox PLA and the Grey shell is Elegoo water-soluble resin. $49.00 for 1000 kg. I did discover that there is 1-year expiration on the water-soluble resin. I did not see an expiration on the other resin.
]]> 3 2517869cc24c616ce3ae735da93b1f39 James posted an update in the group 3D resin Printing: I need to add some more support on the edge. that was […] https://www.myrccenter.com/activity/p/14447/ Tue, 23 Mar 2021 00:10:16 +0000 I need to add some more support on the edge. that was the only place that sagged
]]> 0 969e76d787db50aec3c17b76a9fdc8f3 James posted an update in the group 3D resin Printing: I replaced the LCD on the Elegoo Mars Pro. I printed […] https://www.myrccenter.com/activity/p/14446/ Tue, 23 Mar 2021 00:06:52 +0000 I replaced the LCD on the Elegoo Mars Pro. I printed the Shell of my 5 in 38 gun model. It tuned out pretty good. with 1 exception
]]> 0 5bac3433e29b76643c2b7c4badb6b6f6 James posted an update in the group 3D resin Printing: Here is a good video on removing resin supports https://www.myrccenter.com/activity/p/14332/ Mon, 15 Mar 2021 10:49:45 +0000 Here is a good video on removing resin supports

]]> 0 5f3de81f3ad0691ca8bb9b8122a1a2a1 James replied to the discussion Elegoo Service in the forum 3D resin Printing https://www.myrccenter.com/groups/3d-resin-printing/forum/topic/elegoo-service-2/#post-3795 Thu, 04 Mar 2021 01:23:58 +0000 Reply to Elegoo Service

Finally resolved. after following their instruction and reprinting the model and sending them more photos. They are sending me a new lac from China.

]]> 979b72b280268ab4a79f923858cdd46c James posted an update in the group 3D resin Printing: Here is the short clip that Elegoo support asked me to send to them https://www.myrccenter.com/activity/p/14139/ Tue, 23 Feb 2021 16:40:47 +0000 Here is the short clip that Elegoo support asked me to send to them

]]> 0 08369b705476e9612c6ffeaaa6fe28ac James started the discussion Elegoo Service in the forum 3D resin Printing https://www.myrccenter.com/groups/3d-resin-printing/forum/topic/elegoo-service-2/ Tue, 23 Feb 2021 01:09:10 +0000 Elegoo Service

I can’t believe it. I submitted the support request to Elegoo back on Feb 7th and they finally got back to me. Now I have to try to duplicate the issue.

]]> 881921cf87ce1c19d672963d414b83e4 James started the discussion Elegoo Service in the forum 3D resin Printing https://www.myrccenter.com/groups/3d-resin-printing/forum/topic/elegoo-service/ Tue, 23 Feb 2021 01:09:00 +0000 Elegoo Service

I can’t believe it. I submitted the support request to Elegoo back on Feb 7th and they finally got back to me. Now I have to try to duplicate the issue.

]]> 201d3db945c21298f7f1b7d85de024bb James posted an update in the group 3D resin Printing: I have yet to hear from the Elegoo Support team https://www.myrccenter.com/activity/p/12899/ Wed, 10 Feb 2021 00:43:20 +0000 I have yet to hear from the Elegoo Support team

]]> 0 6cdb913f0b88cbe386e2f335b0abf84a James posted an update in the group 3D resin Printing: Turned on the resin printer yesterday and it printed […] https://www.myrccenter.com/activity/p/12887/ Sun, 07 Feb 2021 15:47:34 +0000 Turned on the resin printer yesterday and it printed out another blob. I just replaced the LCD. I contacted Elegoo Support.

]]> 0 bbb555dd992f79e834bf0cea829746c8 David R posted an update in the group 3D resin Printing: First large 3D resin print I made and it worked, […] https://www.myrccenter.com/activity/p/12858/ Sun, 10 Jan 2021 00:02:06 +0000 First large 3D resin print I made and it worked, yahoo! 195mm tall print on the Elegoo Saturn. As you can see the resin is still dripping off. I am so happy. Bottom hull part for a Japanese I-52.
]]> 0 76e539aa17ef88f17c399fb4a2402d02 David R posted an update in the group 3D resin Printing: This is the hull part i will try to print with the […] https://www.myrccenter.com/activity/p/12851/ Fri, 08 Jan 2021 00:19:27 +0000 This is the hull part i will try to print with the resin printer. Do I need more supports James?
]]> 0 ece7420c72cb1a1e519ea7a10f012f98 James posted an update in the group 3D resin Printing: Here is another of his videos https://www.myrccenter.com/activity/p/12693/ Mon, 04 Jan 2021 20:41:59 +0000 Here is another of his videos

]]> 0 b9a5fbfda399e4d14f34753408cd3e40 James posted an update in the group 3D resin Printing: This guy is awesome at setting up Resin supports https://www.myrccenter.com/activity/p/12692/ Mon, 04 Jan 2021 20:27:19 +0000 This guy is awesome at setting up Resin supports

]]> 0 db076de7e9ddeb8a1dadc9d49836716f David R posted an update in the group 3D resin Printing: Ok I installed a FEP protector kit over my Saturn screen. […] https://www.myrccenter.com/activity/p/12688/ Mon, 04 Jan 2021 04:50:46 +0000 Ok I installed a FEP protector kit over my Saturn screen. I did a test print with it on without changing any printing setting and the print came out prefect. This is what the protector looks like. It just a Mars FEP sheet with a vinyl gasket. Now i dont need to worry about a spill of resin on screen, as the saturn screen cost I hear $150+… Read more

]]> 0 d9cd9762a9e5dd1354b52e5a95734ef5 David R posted an update in the group 3D resin Printing: Enclosure I made for the Elegoo Saturn. I made it out of […] https://www.myrccenter.com/activity/p/12660/ Mon, 28 Dec 2020 04:52:15 +0000 Enclosure I made for the Elegoo Saturn. I made it out of a card board shipping box and a piece of Clear plexiglass I had laying around. It helps to keep the heat in the box in the cold garage and the smell of resin in the box.
]]> 0 ec4a911dacebe8317a2a1b39779b245c David R posted an update in the group 3D resin Printing: my first print on the Elegoo Saturn. I took the […] https://www.myrccenter.com/activity/p/12659/ Mon, 28 Dec 2020 04:47:33 +0000 my first print on the Elegoo Saturn. I took the picture while it was still under the curing light
]]> 0 efa3a4145bdd46e4f3e07b28a8f342c6 David R posted an update in the group 3D resin Printing: Will first print failed. It was my fault, wrong […] https://www.myrccenter.com/activity/p/12656/ Sun, 27 Dec 2020 04:02:34 +0000 Will first print failed. It was my fault, wrong settings. However it was a good failure. I drain the resin tank and when I did i spotted something odd in the one corner of the FEP sheet. The was pin hole not open yet but just waiting to fail. I removed damaged FEP, it must have happen at the factory. I installed a new FEP and will try… Read more

]]> 0 eb3fec36693c894d170d831d6e10e1e6 David R posted an update in the group 3D resin Printing: The resin Curing box I made from a 3 gal bucket, […] https://www.myrccenter.com/activity/p/12655/ Sat, 26 Dec 2020 23:16:53 +0000 The resin Curing box I made from a 3 gal bucket, aluminum foil and LED lights



]]> 0 41363eaac31752d28a4c8c342e3d68f0 David R posted an update in the group 3D resin Printing: Sweet! https://www.myrccenter.com/activity/p/12562/ Fri, 18 Dec 2020 21:09:26 +0000 Sweet!
]]> 0 01d969c6c8daf3abbd3a9d84039e058d James posted an update in the group 3D resin Printing: Here is a good video on exposure times to prevent LCD burn out https://www.myrccenter.com/activity/p/12352/ Sun, 06 Dec 2020 23:10:38 +0000 Here is a good video on exposure times to prevent LCD burn out

]]> 0 dc8168472ff6888160dae94e17653f5b James posted an update in the group 3D resin Printing: Here are the before and after prints after replacing the […] https://www.myrccenter.com/activity/p/12307/ Sat, 28 Nov 2020 02:05:23 +0000 Here are the before and after prints after replacing the LCD on the Elegoo Mars pro. I have put a lot of hours into the resin printer they never tell us that the LCD screen will wear out. the Blob is the half-track body before the replacement.












]]> 10