My R/C Center | Indoor Models (Rubber powered and R/C) | Activity https://www.myrccenter.com/groups/indoor-models-rubber-powered-and-rc/ Activity feed for the group, Indoor Models (Rubber powered and R/C). Thu, 21 May 2026 00:21:58 +0000 https://buddypress.org/?v=2.8.61 en-US 30 hourly 2 be3c44da416a4e7fa1bf94bb62d57ffb Tom posted an update in the group Indoor Models (Rubber powered and R/C): Lost some inspiration because been so little flying […] https://www.myrccenter.com/activity/p/17950/ Fri, 20 Dec 2024 20:19:24 +0000 Lost some inspiration because been so little flying outdoors this summer. Started to put together this kit from RC Factory. Nice instruction and quality.  Next step is to solder servos and esc too the receiver. Found this very small receiver at Banggood. Cheap and light 0.9g. 
]]> 2 c5d8ba89226135b777bd1ef627aa5ef0 David R joined the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/17892/ Wed, 26 Jun 2024 16:02:50 +0000 0 29ace08bc1f8dc2117260a9a625602e2 Peter V joined the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/17889/ Wed, 26 Jun 2024 15:49:50 +0000 0 7230d08ec315303645302e9f58ba3bc9 Tom posted an update in the group Indoor Models (Rubber powered and R/C): It's almost done, will make it ready tomorrow. Friday is […] https://www.myrccenter.com/activity/p/17849/ Wed, 24 Apr 2024 19:58:26 +0000 It’s almost done, will make it ready tomorrow. Friday is the last indoor flying day for the season. The all up weight turned up to be 86g, a little bit too heavy for the coaxial engine. Put on a T motor instead. Been  busy with  so many other things at  home  so that’s why it took so long time to get it ready.  If  somebody can film it I’ll…

Read more

]]> 4 f9a415bef5fe90d837d52d423929abb5 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Underside is done, all 0,5mm carbon strips. Overside will […] https://www.myrccenter.com/activity/p/17842/ Sat, 02 Mar 2024 22:49:51 +0000 Underside is done, all 0,5mm carbon strips. Overside will be easier. Haven’t decided about landing gear,  maybe need to be 1,5mm. Slowly getting there. 
]]> 1 9be89b5a938aa433f88a415322347b30 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Painted the sides ( not so good) and joined the […] https://www.myrccenter.com/activity/p/17840/ Mon, 19 Feb 2024 20:45:48 +0000 Painted the sides ( not so good) and joined the fuselage with the wings. I’m using super phatic glue from Deluxe Materials. It’s lighter than CA glue and more flexible.  The downsides is that it takes longer too dry and the joint is a little bit brown. Next step will be to strengthen the structure with carbon fiber strips.
]]> 0 24907a15077c4d3fbfd5e5608800938c Tom posted an update in the group Indoor Models (Rubber powered and R/C): Started with the mylar. The build is progressing […] https://www.myrccenter.com/activity/p/17837/ Sat, 17 Feb 2024 22:06:51 +0000 Started with the mylar. The build is progressing very slowly,  have so many other things to do. 🙃
]]> 3 aea54371e2f45a9c518dbb3fc39d6d16 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Been putting in some carbofiber.  https://www.myrccenter.com/activity/p/17834/ Fri, 09 Feb 2024 21:04:04 +0000 Been putting in some carbofiber. 
]]> 1 622af8ec0f7d12a48c47b29d4042d981 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Have just started a new build. Here's the depon that I […] https://www.myrccenter.com/activity/p/17830/ Sun, 04 Feb 2024 21:50:52 +0000 Have just started a new build. Here’s the depon that I have to start with. 
]]> 1 d9c2e3b6bbc505970272b2f336993977 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Happy New year🍾Sitting here with my two friends.  https://www.myrccenter.com/activity/p/17824/ Sun, 31 Dec 2023 21:00:46 +0000 Happy New year🍾

Sitting here with my two friends. 
]]> 1 f9f10d2e67edf7261f3895c4c2da3ed6 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Was flying my indoorplane today. A friend filmed it 🙃 […] https://www.myrccenter.com/activity/p/17813/ Wed, 27 Dec 2023 20:28:25 +0000 Was flying my indoorplane today. A friend filmed it 🙃 Could be better filming but this is what I\’ll got. Really like this plane. Merry Christmas by the way 🙂

]]> 1 f3637ac3eea3c042d15d9b3386e1a199 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Flies really great, post a video after Christmas. […] https://www.myrccenter.com/activity/p/17806/ Fri, 22 Dec 2023 20:51:27 +0000 Flies really great, post a video after Christmas. Have started to build a new and lighter plane. Aim for 60 to 70g. 🙂

]]> 1 734ee453a5b565e8bdd774decfe9ac04 Tom posted an update in the group Indoor Models (Rubber powered and R/C): The weight of the plane turned out to be 100g […] https://www.myrccenter.com/activity/p/17759/ Fri, 05 May 2023 19:44:34 +0000 The weight of the plane turned out to be 100g with everything on board, not to bad because it\’s quite big. Next autumn I\’ll try to build a lighter and a bit smaller plane.

]]> 1 4b893ccd0dc079a895cfe4787000c8e5 Tom posted an update in the group Indoor Models (Rubber powered and R/C): When l was going to check the plane I found out that I […] https://www.myrccenter.com/activity/p/17746/ Fri, 28 Apr 2023 20:02:55 +0000 When l was going to check the plane I found out that I got the wrong propellers. Both were clockwise, have finally found the right ones in carbonfiber. Unfortunately the indoor flying season has ended here. Will try the plane outdoor on a calm day. Post a video as soon as I can.

]]> 1 591b7549d76a4b723db6d244226e266a Tom posted an update in the group Indoor Models (Rubber powered and R/C): Almost finished, servos are in place. Receiver and esc […] https://www.myrccenter.com/activity/p/17731/ Thu, 06 Apr 2023 19:54:14 +0000 Almost finished, servos are in place. Receiver and esc are waiting to be mounted. 
]]> 1 261509132b5be3d5fabf74cd14141bb0 Tom posted an update in the group Indoor Models (Rubber powered and R/C): The build is getting forward, slowly. Try to speed up […] https://www.myrccenter.com/activity/p/17697/ Fri, 17 Mar 2023 20:32:37 +0000 The build is getting forward, slowly. Try to speed up next week. 🙃
]]> 0 f542913f9c56fdd63b8568e56b9ddd88 Tom posted an update in the group Indoor Models (Rubber powered and R/C): This video is from another indoor flying event 3 weeks ago. https://www.myrccenter.com/activity/p/17692/ Wed, 08 Mar 2023 20:47:15 +0000 This video is from another indoor flying event 3 weeks ago.

]]> 1 d394b0e44527f6fe19091c3719bd206b Tom posted an update in the group Indoor Models (Rubber powered and R/C): Here's some pic's from yesterday's flying event. […] https://www.myrccenter.com/activity/p/17690/ Tue, 07 Mar 2023 20:53:46 +0000 Here’s some pic’s from yesterday’s flying event. Big indoor place and only about 10 participants. My planes are on the second foto.









]]> 1 371a8b340b6809d881598be5abfdfc1e Tom posted an update in the group Indoor Models (Rubber powered and R/C): Finally I have covered it with mylar, need to have […] https://www.myrccenter.com/activity/p/17682/ Fri, 03 Mar 2023 20:57:09 +0000 Finally I have covered it with mylar, need to have it finished next weekend. That’s maybe the last indoor flying day for me that I can take part in before the outdoor season starts.  We’ll see how it goes 😏 
]]> 4 c772bccae987dd4eaa6d205ce014401b Tom posted an update in the group Indoor Models (Rubber powered and R/C): Next step is to cover it with mylar and paint it with […] https://www.myrccenter.com/activity/p/17636/ Thu, 16 Feb 2023 06:41:47 +0000 Next step is to cover it with mylar and paint it with an airbrush. Try too find time at the weekend.

]]> 3 98c5adc14fdeb36b3fc2339bf9837f4c Tom posted an update in the group Indoor Models (Rubber powered and R/C): Just started building. It's going to take some time. […] https://www.myrccenter.com/activity/p/17630/ Tue, 14 Feb 2023 22:37:58 +0000 Just started building. It’s going to take some time. I’ve started with  the carbon fiber reinforcement. Here you can see the motor and props I’m going to use.
]]> 3 64702f0c04fdbc73dc27d67fbbce45f0 Tom posted an update in the group Indoor Models (Rubber powered and R/C): Got in touch through email with the Dutch F3p […] https://www.myrccenter.com/activity/p/17597/ Fri, 03 Feb 2023 20:52:56 +0000 Got in touch through email with the Dutch F3p indoor champion and he sent me precut foam board to build a really lightweight model. Got the stuff today. Will start on Monday.

]]> 4 729ab135ee8ad387152d6cc560f9cece Tom posted an update in the group Indoor Models (Rubber powered and R/C): To many projects but need to find inspiration to […] https://www.myrccenter.com/activity/p/17567/ Thu, 05 Jan 2023 20:36:21 +0000 To many projects but need to find inspiration to start building 🙃

]]> 1 7bde19502e5a053adf7a29b5ca61ea5f Tom posted an update in the group Indoor Models (Rubber powered and R/C): Have bought some stuff too build a lightweight […] https://www.myrccenter.com/activity/p/17524/ Fri, 16 Dec 2022 20:56:49 +0000 Have bought some stuff too build a lightweight indoor foamie. Made some drawings yesterday. Hope I\’ll find time to start the build.

]]> 0 3235eb6d62e012ac1db96c7f0da1b29a Tom joined the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/17269/ Mon, 15 Aug 2022 20:07:17 +0000 0 d74ac8b7b50ce2d4908cfea3ee718258 Alan Bond joined the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/2337/ Wed, 10 May 2017 01:20:58 +0000 0 ac3545578c0aabd7ecb105055a38c53a Ed Figueroa joined the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/2148/ Tue, 11 Oct 2016 20:33:05 +0000 0 579b42a7a28d67f98d31d8debc487427 James posted an update in the group Indoor Models (Rubber powered and R/C): https://youtu.be/MmPTEN_0PBo https://www.myrccenter.com/activity/p/16/ Thu, 09 Apr 2015 01:26:34 +0000 https://youtu.be/MmPTEN_0PBo

]]> 0 6b348e1e438d353ccc401022a1de9f7b James started the discussion Indoor Rubber Motor models in the forum Indoor Models (Rubber powered and R/C) http://www.myrccenter.com/groups/indoor-models-rubber-powered-and-rc/forum/topic/indoor-rubber-motor-models/ Wed, 08 Apr 2015 23:39:59 +0000 Indoor Rubber Motor models

This forum is open to any and all who participate in the indoor flying hobby

]]> 38ffce2f1100fcd39e026e5f58b958c9 James created the group Indoor Models (Rubber powered and R/C) https://www.myrccenter.com/activity/p/12/ Wed, 08 Apr 2015 23:19:28 +0000 0